Your VARIO Helicopter Dealer in Canada, RC Helicopters,3D, Turbine Scale fuselages, pod and boom, Airwolf, Jet Ranger, Bell 47, Lama, Huey, Dauphin, R22, Benzin, SkyFox , X-Treme, Great source for your hobbies

JetCat PHT3-3 Scale Helicopter Mechanics
Order No. JetCat PHT3-

$4,994.71 CAN

Click to enlarge

The PHT3/3 Turbine mechanics are capable of powering even the largest RC helicopters with proven reliability.

Our version of the PHT3 turbine mechanics comes with 12mm main shaft system making it ready for fuselage application.
ECU can be set up for 103000 rpm resulting in rotor RPM of 913 rpm.

Output: 3.5 - 5.0 kW>> 8.0Hp
Turbine speed: 94,000 - 103,000 rpm.
Weight: 2,700 g
Fuel consumption: 195 - 230 min / ml.
Fuel: Kerosene Jet A1 or Kerosene
Lubrication: approximately 5% fully synthetic. Turbine Oil in the fuel
Service interval: 50 hours

Fittings include quick connect couplers for filling.

Original JetCat AutoStart system:
Fully automatic turbine startup by a command from the R/C transmitter, without external connections
Low maintenance, quiet running toothbelt drive
in the primary gear stages
Special shaped gear mechanism in the final gear stage for silent operation and positive power transmission
Complete package: unpack, install, fly!

Optional Kerosene start is available

Precision ceramic ball bearings for low maintenance operation.
Screen in front of the turbine inlet avoids FOD
(foreign object damage) of the compressor / turbine
Special CAD designed turbine wheel, for maximum shaft power at minimum residual thrust
Original JetCat “Jet-tronic” ECU: RPM regulator for constant rotor speed. User programmable electronics.
Turbine starts without compressed air or fans. Automatic cooling when the turbine is shut off.
RS232 serial interface for linking to a computer
Plain text display of the current running parameters for example: exhaust gas temperature, RPM, fuel consumption,
remaining fuel, last run time, total run time, battery voltage,
turbine condition, last shut-down reason, etc.

The system includes:
Turbine mechanics with 12mm shaft
ECU (electronic control unit) turbine control computer
GSU (ground support unit) interface
Fuel Pump
Fuel Valve
Gas Valve
Start-up Gas tank
Interface board
All connection cables
Fuel tubing
2400 mAh battery for ECU
Festo Fittings
Aluminum filter
Instruction manual

We Also Recommend :